How to Setup a Wireless Router

We cannot imagine life without fast internet. A business would suffer great losses if its internet connections were slow. You therefore need to buy a new faster router. You then need a way to set it up. There is a guideline that shall make the process much easier to manage.

You need to place the router at a place where all your devices see it. Careful not to place it in a Wi-Fi dead spot. If this is the case, you shall need a cable to connect it to the gateway ethernet port. Alternatively, you can opt for the more elegant mesh-style router. This usually comprises a node at the gateway, then others spread out in the house. This is how all areas shall have a network. You can visit the Router Login Netgear website for more info. Have the router on a flat surface while you are setting up.

You need to set up a gateway. There are those routers that come with a WAN port for connecting to a gateway already set. For the rest, they shall be picking them and assigning them as WAN or LAN. You need to first disable the current router. Even if it is part of the modem, you need to. This way, you will not have two routers competing. If you leave them that way, you will not manage a meshwork. Using the gateway’s IP address, go to a browser and find its configuration page. Go to the allocation mode tab and click on passthrough option. If you can’t see this, call your ISP. You may be blocked from it. Now is the time to turn off the modem’s Wi-Fi access point. There is no need to leave it on. The gateway then needs to change.

Connect the gateway to your new router. Using an ethernet cable, connect the gateway from its LAN port to the router on its WAN port. Next, connect a PC to the router and the phone line to the modem. Switch on the gateway. This might take time for any response to be seen, so be patient. Then switch on the router and wait.

Next, change the admin password on the wireless router. You can use its smartphone app to do this. If not, use the browser-based option. Enter the router’s IP address and you’ll see what you need. Use the provided admin username and password on the package. Then immediately change the password. Keep it safe.

Next, you need to update the firmware. It may not be the latest. Normally, it checks for an update directly. You can reboot it after it finishes. You should then set up a Wi-Fi network password. There shall be a connectivity tab for you to do this. You should rely on the WAP2 encryption, seeing as the WEP option is not adequate for this.